IMDGSEEK · 危险品海运查询 打开交互工作台 →

UN3269 聚酯树脂器材

POLYESTER RESIN KIT, liquid base material

IMDG Code 42-24 第3类 包装类别 II 更新 2026-09-08

基本信息

UN 编号UN3269
中文名称聚酯树脂器材
英文名称POLYESTER RESIN KIT, liquid base material
危险类别第3类
包装类别II
海洋污染物
有限数量5 L
例外数量See SP340
EmS 应急措施F-E,S-D(F-E, S-D)

本 UN 号下的各包装类别条目

包装类别类别有限数量例外数量包装导则罐柜导则
II 3 5 L See SP340 P302
III 3 5 L See SP340 P302

物质性质与外观

聚酯树脂器材由两部分组成, 基本材料(易燃液体)和活化剂 (有机过氧化物),每个都分别装 在内包装里。

Polyester resin kits consist of two components: a base material (flammable liquid) and an activator (organic peroxide), each separately packed in an inner packaging.

出处:IMDG Code 42-24 第 737 页

包装要求

本条目适用的包装导则: P302 ;有限数量 5 L,例外数量 See SP340。

P302

P302 本包装导则适用于UN 3269。 只要符合第4.1.1和4.1.3节的一般规定,允许使用下列包装: 外容器: 桶(1A1、1A2、1B1、1B2、1N1、1N2、1H1、1H2、1D、1G); 箱(4A、4B、4N、4C1、4C2、4D、4F、4G、4H1、4H2); 罐(3A1、3A2、3B1、3B2、3H1、3H2)。 P302 内容器: 活化剂(有机过氧化物)如果为液体,每个内容器的最大装载量为125毫升,如为固体,每个内容器的最大装载量为500克。 基料和活化剂须分开单独包装在内容器中。 若发生泄漏时,各部分彼此之间不会发生危险的反应,可放在同一外容器中。 根据对基料适用的第3类标准,容器须符合包装类II或III的性能指标。

P302 This instruction applies to UN 3269. The following combination packagings are authorized, provided that the general provisions of 4.1.1 and 4.1.3 are met: Outer packagings: Drums (1A1, 1A2, 1B1, 1B2, 1N1, 1N2, 1H1, 1H2, 1D, 1G). Boxes (4A, 4B, 4N, 4C1, 4C2, 4D, 4F, 4G, 4H1, 4H2). Jerricans (3A1, 3A2, 3B1, 3B2, 3H1, 3H2). Inner packagings: T he activator (organic peroxide) shall have a maximum quantity of 125 ml per inner packaging if liquid, and g per inner packaging if solid. The base material and the activator shall be each separately packed in inner packagings. The components may be placed in the same outer packaging provided that they will not interact dangerously in the event of a leakage. Packagings shall conform to the packing group II or III performance level according to the criteria for Class 3 applied to the base material.

出处:IMDG Code 42-24 第 204 页(4.1.4.1)

中型散装容器(IBC)要求

本条目无中型散装容器(IBC)运输要求。

罐柜运输要求

本条目无罐柜运输要求(一览表罐柜导则栏为空)。

运输标签与标记

本货物包件应张贴以下标签与标记:

易燃液体 3 3
易燃液体 3

本 UN 可按有限数量运输(一览表额度 5L);若本票按限量运输,须加贴 LQ 标记并符合第 3.4 章要求

本 UN 可按例外数量运输(代码 见 SP34 0);若本票按例外数量运输,须加贴 EQ 标记并符合第 3.5 章要求

特殊规定(Special Provisions)

本条目适用特殊规定: 236340

SP 236

聚酯树脂套装由两部分组成:基础材料(第3类或第4.1类,包装类 II或 III)和催化剂(有机过氧化物)。这种有机过氧化物须是D型、E型或F型,不需要温度控制。 根据第3类或第4.1类分类标准,包装类须为II或III,适用于基础材料。第3.2章《危险货物一览表》第7a栏所示的限量适用此基础材料。

Polyester resin kits consist of two components: a base material (either class 3 or class 4.1, packing group II or III) and an activator (organic peroxide). The organic peroxide shall be type D, E, or F, not requiring temperature control. The packing group shall be II or III, according to the criteria of either class 3 or class 4.1, as appropriate, applied to the base material. The quantity limit shown in column 7a of the Dangerous Goods List of chapter 3.2 applies to the base material.

出处:IMDG Code 42-24 第 770 页

SP 340

如果在其内包装内含有不超过《危险货物一览表》第7b栏中对具体物质规定的可免除量的危险物质,化学品箱、急救箱和聚脂树脂组合可按照第 3.5章运输。虽然在危险货物一览表中没有单独规定第5.2类物质的免除量,但可放在化学品箱、急救箱和聚脂树脂组合中,并被指定代码E2 (见第3.5.1.2条)。

Chemical kits, first aid kits and polyester resin kits containing dangerous substances in inner packagings which do not exceed the quantity limits for excepted quantities applicable to individual substances as specified in column 7b of the Dangerous Goods List may be transported in accordance with chapter 3.5. Class 5.2 substances, although not individually authorized as excepted quantities in the Dangerous Goods List, are authorized in such kits and are assigned code E2 (see 3.5.1.2).

出处:IMDG Code 42-24 第 778 页

积载与隔离

积载与操作积载类B(Category B)
隔离一览表未列明隔离要求

同类其他 UN 号

延伸阅读

你正在查询 UN3269 · 聚酯树脂器材

要出这票货?直接生成 DG 申报资料

按 UN3269 自动带出类别、包装组、隔离要求与危包证清单,省掉翻书对表的时间。

生成 DG 申报资料 →
规则更新了?留个邮箱,43-26 上线时通知你