UN3291 诊疗废物，未具体说明的，未另列明的或(生物) 医学废物，未另列明的或管制下的医疗废物，未另列明的

在对动物和人的医疗或生物研 究中产生的。

Derived from the medical treatment of animals, humans or from bio-research.

出处：IMDG Code 42-24 第 740 页

P621

P621 本导则适用于UN 3291。 只要符合第4.1.1节（不包括第4.1.1.15条）和第4.1.3节的一般规定，允许使用下列包装： （1） 须有足够的吸收材料吸收全部液体，并且容器能够保留液体： 桶（1A2、1B2、1N2、1H2、1D、1G）； 箱（4A、4B、4N、4C1、4C2、4D、4F、4G、4H1、4H2）； 罐（3A2、3B2、3H2）。 P621 容器须符合包装类II的固体性能指标。 （2） 对于装有大量液体的包装： 桶（1A1、1A2、1B1、1B2、1N1、1N2、1H1、1H2、1D、1G）； 罐（3A1、3A2、3B1、3B2、3H1、3H2）； 复合包装（6HA1、6HB1、6HG1、6HH1、6HD1、6HA2、6HB2、6HC、6HD2、 6HG2、6HH2、6PA1、6PB1、6PG1、6PD1、6PH1、6PH2、6PA2、6PB2、 6PC、6PG2或6PD2）。 容器须符合包装类II的液体性能指标。 补充规定： 用于装载碎玻璃和针头等尖锐物体的包装须在第 6.1 章的性能试验条件下耐穿刺并留住液体。

P621 This instruction applies to UN 3291. The following packagings are authorized provided that the general provisions of 4.1.1 except 4.1.1.15 and 4.1.3 are met: (1) Provided that there is sufficient absorbent material to absorb the entire amount of liquid present and the packaging is capable of retaining liquids: Drums (1A1, 1A2, 1B1, 1B2, 1N1, 1N2, 1H1, 1H2, 1D, 1G); Boxes (4A, 4B, 4N, 4C1, 4C2, 4D, 4F, 4G, 4H1, 4H2); Jerricans (3A1, 3A2, 3B1, 3B2, 3H1, 3H2). Packagings shall conform to the packing group II performance level for solids. (2) For packages containing larger quantities of liquid: Drums (1A1, 1A2, 1B1, 1B2, 1N1, 1N2, 1H1, 1H2, 1D, 1G); Jerricans (3A1, 3A2, 3B1, 3B2, 3H1, 3H2); C omposite packagings (6HA1, 6HB1, 6HG1, 6HH1, 6HD1, 6HA2, 6HB2, 6HC, 6HD2, 6HG2, 6HH2, 6PA1, 6PB1, 6PG1, 6PD1, 6PH1, 6PH2, 6PA2, 6PB2, 6PC, 6PG2 or 6PD2). Packagings shall conform to the packing group II performance level for liquids. Additional requirement: Packagings intended to contain sharp objects such as broken glass and needles shall be resistant to puncture and retain liquids under the performance test conditions in Chapter 6.1.

出处：IMDG Code 42-24 第 221 页（4.1.4.1）

LP621

LP621 条文尚未录入本库，请以 IMDG Code 42-24 原书为准。

IBC620

IBC620 本导则适用于UN 3291。 只要符合第4.1.1（第4.1.1.15条除外）、4.1.2和4.1.3节的一般规定，允许使用下列IBCs： 符合包装类II性能指标的硬质防漏IBCs。 补充规定： 须有足够的吸收材料来吸收IBCs内的全部液体。 IBCs须能盛装液体。 用于盛放碎玻璃和针头等尖锐物体的IBCs须具有抗刺穿能力。 4.1.4.3 有关大宗包装使用的包装导则 LP01 包装导则（液体） LP01 只要符合第4.1.1和4.1.3节的一般规定，允许使用下列大型包装： 4 玻璃 10L 钢（50A） 不允许不允许 3m3 塑料 30L 铝（50B） 金属 40L 除钢和铝的其他金属 （50N） 硬质塑料（50H） 天然木（50C） 胶合板（50D） 再生木（50F） 硬质纤维板50G） LP02 包装导则（固体） LP02 只要符合第4.1.1和4.1.3节的一般规定，允许使用下列大型包装： 玻璃 10kg 钢（50A） 塑料b 50kg 铝（50B） 不允许不允许 3mc 金属 50kg 除钢和铝的其他金属纸a,b 50kg （50N） 纤维a,b 50kg 硬质塑料（50H）

IBC620 This instruction applies to UN 3291. The following IBCs are authorized, provided that the general provisions of 4.1.1, except 4.1.1.15, 4.1.2 and 4.1.3 are met: Rigid, leakproof IBCs conforming to the packing group II performance level. Additional provisions: There shall be sufficient absorbent material to absorb the entire amount of liquid present in the IBC. IBCs shall be capable of retaining liquids. IBCs intended to contain sharp objects such as broken glass and needles shall be resistant to puncture. 4.1.4.3 Packing instructions concerning the use of large packagings LP01 PACKING INSTRUCTION (LIQUIDS) LP01 The following large packagings are authorized, provided the general provisions of 4.1.1 and 4.1.3 are met. Inner packagings Large outer packagings Packing group I Packing group II Packing group III Glass 10 L Steel (50A) Plastics 30 L Aluminium (50B) Not allowed Not allowed 3 m3 Metal 40 L Metal other than steel or aluminium (50N) Rigid plastics (50H) Natural wood (50C) Plywood (50D) Reconstituted wood (50F) Rigid fibreboard (50G) LP02 PACKING INSTRUCTION (SOLIDS) LP02 The following large packagings are authorized, provided the general provisions of 4.1.1 and 4.1.3 are met. Inner packagings Large outer packagings Packing group I Packing group II Packing group III 4 Glass 10 kg Steel (50A) Plasticsb 50 kg Aluminium (50B) Not allowed Not allowed 3 m3 Metal 50 kg Metal other than steel or Papera, b 50 kg aluminium (50N) Fibrea, b 50 kg Rigid plastics (50H) Natural wood (50C) Plywood (50D) Reconstituted wood (50F) Rigid fibreboard (50G) Flexible plastics (51H)c a These packagings shall not be used when the substances being transported may become liquid during transport. b Packagings shall be sift-proof. c To be used with flexible inner packagings only. Special packing provision: L2 Deleted L3 For UN Nos.1309, 1376, 1483, 1869, 2793, 2858 and 2878, flexible or fibre inner packagings shall be sift-proof and water-resistant or shall be fitted with a sift-proof and water-resistant liner. L4 For UN Nos.1932, 2008, 2009, 2545, 2546, 2881 and 3189 flexible or fibre inner packagings shall be hermetically sealed.

BK2

BK2 条文尚未录入本库。

经原产国主管当局批准。

As approved by the competent authority of the country of origin.