DIPICRYL SULPHIDE, WETTED with not less than 10% water, by mass
| UN 编号 | UN2852 |
|---|---|
| 中文名称 | 二苦硫,湿的,按质量计,含水不小于10% |
| 英文名称 | DIPICRYL SULPHIDE, WETTED with not less than 10% water, by mass |
| 危险类别 | 第4.1类 |
| 包装类别 | I |
| 海洋污染物 | 否 |
| 有限数量 | 0 |
| 例外数量 | E0 |
| EmS 应急措施 | F-B,S-J(F-B, S-J) |
退敏爆炸物。金黄色结晶片状 物质。在干燥状态下具有爆炸 性并对撞击和热敏感。可能与 重金属或其盐类形成极其敏感 的化合物。
Desensitized explosive. Golden-yellow, crystalline leaflets. Explosive and sensitive to shock and heat in the dry state. May form extremely sensitive compounds with heavy metals or their salts.
出处:IMDG Code 42-24 第 707 页
本条目适用的包装导则: P406 ;有限数量 0,例外数量 E0。
P406 只要符合第4.1.1和4.1.3节的一般规定,允许使用下列包装: (1) 组合包装外包装 (4C1、4C2、4D、4F、4G、4H1、4H2、1G、1D、1H1、1H2、3H1 或 3H2)。 内包装须防水。 P406 (2) 塑料、胶合板或纤维板桶(1H2、1D 或 1G)或箱(4A、4B、4N、4C1、4D、 4F、4C2、4G和4H2),内有防水袋、塑料薄膜衬里或防水涂层。 (3) 金属桶(1A1、A2、1B1、1B2、1N1 或 1N2)、塑料桶(1H1 或 1H2)、金属罐 (3A1、3A2、3B1、或 3B2)、塑料罐(3H1 或 3H2)、钢桶或铝桶内的塑料容器 (6HA1 或 6HB1)、纤维,塑料或胶合板桶内的塑料容器(6HG1、6HH1、 6HD1)、钢箱、铝箱、木箱、胶合板箱、纤维板箱或硬塑料箱内的塑料容器 (6HA2、6HB2、6HC、6HD2、6HG2或6HH2) 补充规定: 包装的设计和构造须防止水分或酒精含量或减敏剂含量的流失。 包装的结构和封闭性须避免爆炸性超压或压力积聚超过300kPa(3bar)。 包装类型和每个包装的最大允许容量受第2.1.3.4条规定的限制。 特殊包装规定: PP24 对于 UN 2852、3364、3365、3366、3367、3368和 3369,每个包件的运输重量不得超过500 g。 PP25 对于UN 1347,每个包件的运输重量不得超过15 kg。 PP26 对于 UN 1310、1320、1321、1322、1344、1347、1348、1349、1517、2907、 3317、3344和3376,包装不得含铅。 PP31 对于 UN 1310、1320、1321、1322、1336、1337、1344、1347、1348、1349、 1354、1355、1356、1357、1517、1571、2555、2556、2557、2852、3317、 3364、3365、3366、3367、3368、3369、3370和3376,包装须密封。 PP48 对于 UN 3474,不得使用金属包装。含有少量金属的其他材料包装,例如第 6.1.4 节中提到的金属封闭件或其他金属配件,不视为金属包装。 PP78 对于UN 3370,每包装的运输装载量不得超过11.5 kg。 PP80 对于 UN 2907 和 3344,包装须符合包装类 II 的性能标准。不得使用符合包装类 I 试验标准的包装。
P406 The following packagings are authorized, provided that the general provisions of 4.1.1 and 4.1.3 are met: (1) Combination packagings Outer packagings: (4C1, 4C2, 4D, 4F, 4G, 4H1, 4H2, 1G, 1D, 1H1, 1H2, 3H1 or 3H2) Inner packagings shall be water-resistant. (2) Plastics, plywood or fibreboard drums (1H2, 1D or 1G) or boxes (4A, 4B, 4N, 4C1, 4D, 4F, 4C2, 4G and 4H2) with a water-resistant inner bag, plastics film lining or water-resistant coating. (3) Metal drums (1A1, 1A2, 1B1, 1B2, 1N1 or 1N2), plastics drums (1H1 or 1H2), metal jerricans (3A1, 3A2, 3B1 or 3B2), plastics jerricans (3H1 or 3H2), plastics receptacle in steel or aluminium drums (6HA1 or 6HB1), plastics receptacle in fibre, plastics or plywood drums (6HG1, 6HH1 or 6HD1), plastics receptacle in steel, aluminium, wood, plywood, fibreboard or solid plastics boxes (6HA2, 6HB2, 6HC, 6HD2, 6HG2 or 6HH2). Additional provisions: Packagings shall be designed and constructed to prevent the loss of water or alcohol content or the content of the phlegmatizer. Packagings shall be so constructed and closed as to avoid an explosive overpressure or pressure build-up of more than 300 kPa (3 bar). The type of packaging and maximum permitted quantity per packaging are limited by the provisions of 2.1.3.4. Special packing provisions: PP24 UN Nos. 2852, 3364, 3365, 3366, 3367, 3368 and 3369 shall not be transported in quantities of more than 500 g per package. PP25 UN 1347 shall not be transported in quantities of more than 15 kg per package. PP26 For UN Nos. 1310, 1320, 1321, 1322, 1344, 1347, 1348, 1349, 1517, 2907, 3317, 3344 and 3376, packagings shall be lead-free. PP31 For UN Nos. 1310, 1320, 1321, 1322, 1336, 1337, 1344, 1347, 1348, 1349, 1354, 1355, 1356, 1357, 1517, 1571, 2555, 2556, 2557, 2852, 3317, 3364, 3365, 3366, 3367, 3368, 3369, 3370 and 3376, packagings shall be hermetically sealed. PP48 For UN 3474, metal packagings shall not be used. Packagings of other material with a small amount of metal, for example metal closures or other metal fittings such as those mentioned in 6.1.4, are not considered metal packagings. PP78 UN 3370 shall not be transported in quantities of more than 11.5 kg per package. PP80 For UN Nos. 2907 and 3344, packagings shall meet the packing group II performance level. Packagings meeting the test criteria of packing group I shall not be used. 4
出处:IMDG Code 42-24 第 208 页(4.1.4.1)
对于 UN 2852、3364、3365、3366、3367、3368和 3369,每个包件的运输重量不得超过500 g。
UN Nos. 2852, 3364, 3365, 3366, 3367, 3368 and 3369 shall not be transported in quantities of more than 500 g per package.
对于 UN 1131、1553、1693、1694、1699、1701、2478、2604、2785、3148、 3183、3184、3185、3186、3187、3188、3398(包装类 II 和 III)、3399(包装类 II 和III)、3413和3414,包装须气密封口。
For UN Nos. 1131, 1553, 1693, 1694, 1699, 1701, 2478, 2604, 2785, 3148, 3183, 3184, 3185, 3186, 3187, 3188, 3398 (PG II and III), 3399 (PG II and III), 3413 and 3414, packagings shall be hermetically sealed.
本条目无中型散装容器(IBC)运输要求。
本条目无罐柜运输要求(一览表罐柜导则栏为空)。
本货物包件应张贴以下标签与标记:
4.1本条目适用特殊规定: 28。
此物质可按照第 3 类或第 4.1 类规定运输,但前提是其包装须确保在运输过程中任何时候稀释剂的百分比不会低于规定值(见第2.3.1.4 和 2.4.2.4条)。如果未说明稀释剂,则须包装该物质,使爆炸性物质的量不超过规定值。
This substance may be transported under the provisions of class 3 or class 4.1 only if it is so packaged that the percentage of diluent will not fall below that stated, at any time during transport (see 2.3.1.4 and 2.4.2.4). In cases where the diluent is not stated, the substance shall be packed so that the amount of explosive substance does not exceed the stated value.
出处:IMDG Code 42-24 第 765 页
| 积载与操作 | 积载类D(Category D) |
|---|---|
| 隔离 | SG7 SG30 |
“远离”第3类。
Stow “away from” class 3.
“远离”SGG7 - 重金属及其盐类。
Stow “away from” SGG7 – heavy metals and their salts.
出口危险货物包装使用鉴定结果单(危包证)的办理逻辑,以及它和船级社证、钢瓶证、SOC 罐证分别在什么场景下用、向谁申请。
DG 申请表(DGD)被船公司退回,十有八九是这十个问题。逐条列出错误表现、船司退回话术和正确填法。
按 UN2852 自动带出类别、包装组、隔离要求与危包证清单,省掉翻书对表的时间。
生成 DG 申报资料 →