UN3152 多卤联苯类，固体的或多卤三联苯类，固体的

具有能感觉到气味的固体，熔 点从2℃至164℃不等，摄入或 皮肤接触会中毒，本条目包括 如沾染上无游离液体存在的明 显的多卤联苯或多卤三联苯的 破布、废棉、布料、锯屑等的 吸收材料。

Solid with a perceptible odour. Melting point of solids varies from 2 C to 164 C. Harmful by ingestion or by skin contact. This entry also ° ° covers articles, such as rags, cotton waste, clothing or sawdust, containing polyhalogenated biphenyls or polyhalogenated terphenyls where no free visible liquid is present.

出处：IMDG Code 42-24 第 728 页

P906

P906 本导则适用于UN 2315、3151、3152和3432。 只要符合第4.1.1和4.1.3节的一般规定，允许使用下列包装： （1） 对于含有多氯联苯、多卤化联苯、多卤化三联苯或卤化一甲基二苯甲烷或受气污染的液体和固体：须根据P001或P002规定使用包装，选适用者。 （2） 对于变压器、电容器和其他物品： （a） 包装符合包装导则 P001 或 P002。物品须使用合适的衬垫材料固定，以防止在正常运输条件下意外移动；或 （b） 防漏包装，除物品外，该包装还能够容纳其中存在的液态多氯联苯、多卤化联苯、多卤化三联苯或卤化一甲基二苯甲烷的至少 1.25 倍容积。包装内须有足够的吸附材料，以吸收物品中所含液体的至少 1.1倍容量。一般情况下，变压器和电容器须装在防漏金属包装中，该包装除能容纳变压器和电容器外，还能容纳其中至少1.25倍容积的液体。 注 1：允许的包装净重可超过 400 kg（见第 4.1.3.3条）。 尽管有以上规定，未按 P001 和 P002 包装的液体和固体以及未经包装的变压器和电容器可装于具有防漏金属托盘且高度至少为 800mm 的货物运输组件中，内有充足的惰性吸收材料，可吸收至少1.1倍容积的任何游离液体。 注2：允许的包装净重可超过 400 kg（见第 4.1.3.3条）。 P906 补充规定： 须采取充分措施密封变压器和电容器，以防止在正常运输条件下发生泄露。

P906 This instruction applies to UN Nos. 2315, 3151, 3152 and 3432. The following packagings are authorized, provided the general provisions of 4.1.1 and 4.1.3 are met: (1) For liquids and solids containing or contaminated with PCBs, polyhalogenated biphenyls, polyhalogenated terphenyls or halogenated monomethyldiphenylmethanes: Packagings in accordance with P001 or P002, as appropriate. (2) For transformers and condensers and other articles: (a) Packagings in accordance with packing instructions P001 or P002. The articles shall be secured with suitable cushioning material to prevent inadvertent movement during normal conditions of transport; or (b) Leakproof packagings which are capable of containing, in addition to the articles, at least 1.25 times the volume of the liquid PCBs, polyhalogenated biphenyls, polyhalogenated terphenyls or halogenated monomethyldiphenylmethanes present in them. There shall be sufficient absorbent material in the packagings to absorb at least 1.1 times the volume of liquid which is contained in the articles. In general, transformers and condensers shall be carried in leakproof metal packagings which are capable of holding, in addition to the transformers and condensers, at least 1.25 times the volume of the liquid present in them. Note 1: The packagings authorized may exceed a net mass of 400 kg (see 4.1.3.3). Notwithstanding the above, liquids and solids not packaged in accordance with P001 and P002 and unpackaged transformers and condensers may be transported in cargo transport units fitted with a leakproof metal tray to a height of at least 800 mm, containing sufficient inert absorbent material to absorb at least 1.1 times the volume of any free liquid. Note 2: The packagings authorized may exceed a net mass of 400 kg (see 4.1.3.3). Additional provision: Adequate provisions shall be taken to seal the transformers and condensers to prevent leakage during normal conditions of transport.

出处：IMDG Code 42-24 第 229 页（4.1.4.1）

IBC08

IBC08 只要符合第4.1.1、4.1.2和4.1.3节的一般规定，允许使用下列IBCs： 金属（11A、11B、11N、21A、21B、21N、31A、31B 和 31N）； 硬质塑料（11H1、11H2、21H1、21H2、31H1 和 31H2）； 复合包装（11HZ1、11HZ2、21HZ1、21HZ2 和 31HZ1）； 纤维板（11G）； 木质包装（11C、11D和11F）； 软质包装（13H1、13H2、13H3、13H4、13H5、13L1、13L2、13L3、13L4、13M1 IBC08 或13M2）。 补充规定： 如果在运输期间固体变成液体，请参见第4.1.3.4条。 特殊包装规定： B3 软质IBCs须防筛漏和防水，或装配防筛漏和防水内衬。 B4 软质、纤维板或木制IBCs须防筛漏和防水，或配备防筛漏和防水内衬。 B6 对于 UN 1327、1363、1364、1365、1386、1408、1841、2211、2217、2793 和 3314的IBCs，无需满足第6.5章的IBCs试验要求。 B21 除了金属或硬质塑料 IBCs，对于盛装固体物质的 IBCs 须装在封闭货物运输组件或货运集装箱/货运车辆内运输，货物运输组件或货运集装箱/货运车辆须具有至少与IBCs高度相同的硬质侧壁或围栏。

IBC08 The following IBCs are authorized, provided the general provisions of 4.1.1, 4.1.2 and 4.1.3 are met: Metal (11A, 11B, 11N, 21A, 21B, 21N, 31A, 31B and 31N); Rigid plastics (11H1, 11H2, 21H1, 21H2, 31H1 and 31H2); Composite (11HZ1, 11HZ2, 21HZ1, 21HZ2 and 31HZ1); Fibreboard (11G); Wooden (11C, 11D and 11F); Flexible (13H1, 13H2, 13H3, 13H4, 13H5, 13L1, 13L2, 13L3, 13L4, 13M1 or 13M2). Additional provisions: Where the solid may become liquid during transport see 4.1.3.4. Special packing provisions: B3 Flexible IBCs shall be sift-proof and water-resistant or shall be fitted with a sift-proof and water-resistant liner. B4 Flexible, fibreboard or wooden IBCs shall be sift-proof and water-resistant or shall be fitted with a sift-proof and water-resistant liner. B6 For UN Nos. 1327, 1363, 1364, 1365, 1386, 1408, 1841, 2211, 2217, 2793 and 3314, IBCs are not required to meet the IBC testing provisions of chapter 6.5. B21 For solid substances in IBCs other than metal or rigid plastics IBCs, the IBCs shall be carried in closed cargo transport units or in freight containers/vehicles, which shall have rigid sides or fences at least to the height of the IBC.

T3

T1-T22 本可移动罐柜导则适用于第1类和第3至9类液体和固体物质，须满足第4.2.1节的一般规定和第6.7.2节的要求。带 FRP 外壳的可移动罐柜导则适用于第 1、3、5.1、6.1、6.2、8 和 9 类或小类物质。此外，第 6.10 章的规定适用于带 FRP 外壳的可移动罐柜。 最小罐壳厚度底部开口最低试验 （单位: mm-标准安全减压规定a 规定b 可移动罐柜导则压力钢） （见第6.7.2.8 （见第6.7.2.6 （bar） （见第6.7.2.4 条） 条） 条） 2.65 见6.7.2.4.2 正常见6.7.2.6.2

S T1 – T22 These portable tank instructions apply to liquid and solid substances of class 1 and classes 3 to 9. The general provisions of section 4.2.1 and the requirements of section 6.7.2 shall be met. The instructions for portable tanks with FRP shells apply to substances of classes or divisions 1, 3, 5.1, 6.1, 6.2, 8 and 9. Additionally, the provisions of chapter 6.10 apply to the portable tanks with FRP shells. Minimum shell thickness Pressure relief Bottom opening (in mm – reference provisionsa provisionsb instruction pressure (bar) steel) (see 6.7.2.8) (see 6.7.2.6) (see 6.7.2.4) 2.65 See 6.7.2.4.2 Normal See 6.7.2.6.2

为该物质指定的可移动罐柜导则适用于粒状和粉末状固体以及在高于其熔点的温度下装填和排放并作为固体块冷却和运输的固体。对于在高于其熔点的温度下运输的固体，见第4.2.1.19条。

The portable tank instruction assigned for this substance applies for granular and powdered solids and for solids which are filled and discharged at temperatures above their melting point and which are cooled and transported as a solid mass. For solids which are transported above their melting point, see 4.2.1.19.

SP 203

本条目不得用于UN 2315的多氯联苯。

This entry shall not be used for polychlorinated biphenyls, UN 2315.

出处：IMDG Code 42-24 第 769 页

SP 305

当这些物质的浓度不超过50 mg/kg时，则不适用本规则的规定。

These substances are not subject to the provisions of this Code when in concentrations of not more than 50 mg/kg.

出处：IMDG Code 42-24 第 775 页

SP 958

本条目也包括的物品含有无明显游离液体的多氯联苯类、多卤联苯类或多卤三联苯类，如破布、废棉、衣服、锯屑。

This entry also covers articles, such as rags, cotton waste, clothing or sawdust, containing polychlorinated biphenyls, polyhalogenated biphenyls or polyhalogenated terphenyls where no free visible liquid is present.

出处：IMDG Code 42-24 第 794 页

按照第7.3.4.2.1、7.6.3.1.2或7.7.3.6条的要求与食品“隔离”。

Segregation from foodstuffs as in 7.3.4.2.1, 7.6.3.1.2 or 7.7.3.6.